EGUARD INTRUDER ALARM EG 802

EGUARD INTRUDER ALARM EG 802-8 ZONE

Alarm Panel with 7 Wired Intrusion Zones and 1 Wired Fire Zone
One Dedicated 24 Hour Panic Zone.
Advanced Micro Controller Based System
Fixed Exit Delay of 45 sec for all 8 zones
0-240 Sec Entry Delay Time Setting
5 Admin Passwords
On Board Alpha Numeric Keypad With 4 line 64
character LCD display
2 Zones of 24 Hrs ,1 for Fire & 1 for Panic
System with Tamper Provision
Arm/Disarm through KeyPad /Key fob
All Zones are User Programmable
Time and Zone Status display on LCD
Can Connect up to 4 Sirens, Useful for local disconnect alert of the 1st Siren
User Programmable Siren Timing up to a maximum of 20 minutes
Built in Battery Backup Provision (Battery to be installed Mandatorily)
Low Battery cut off,over charge cut off,Deep Discharge protection
Battary voltage live indication

EGUARD INTRUDER ALARM EG 802 - Specifications

1. Power Supply : 180 to 275volts,1 Phase 50 Hz AC mains 
2. Backup Power : 12VDC ,7Ah - SMFR Lead Acid Battery
3. Operating Current : 600 mA (Typ.) under Normal Conditions
4. Back Up Time : 9 Hrs. ( under fully charged Conditions )
5. Battery Charging Time : 14 Hrs.
6. No of sensor zones : 5 to 8
7. No of appliance control : 1 (Onboard) 
8. Appliance rating : 500 watts per Port
9. Display : 16 X 4 dot matrix LCD display for menu : LCD Indication for 10 Zones Z1 to Z8 for alarm / Open/Close 
10. Menu Keypad : 16 Alpha Numeric Keys for user setup • Zone Programming • Password creation • Voice recording • Text massage editing • Telephone number input • Date and time • Multifunction menu • Confirm entry • Cancel / Esc key • Number keys 0 to 9 • ACT Key (Recognized only with default Time/display screen) • Up, down, (alternate functions on number keys)
11. No of Hooter output : 2 on board optional expand up to 4
12. Alarm : External hooter

Download PDF

EGUARD INTRUDER ALARM EG 802G

EGUARD INTRUDER ALARM EG 802G-8 ZONE GSM

Alarm Panel with 7 Wired Intrusion Zones and 1 Wired Fire Zone
One Dedicated 24 Hour Panic Zone.
Advanced Micro Controller Based System
Fixed Exit Delay of 45 sec for all 8 zones
0-240 Sec Entry Delay Time Setting
5 Admin Passwords
Arm/Disarm/Alarm/Fault/Panic/Tamper alert to 10 numbers by way of Call/SMS
Memory Provision to store Up to 10 Phone/mobile Numbers
Provision to customize Voice (Up to 8/4-20sec)&SMS for Every Zone as per User Convenience
Provision to Preview Prerecorded Messages
48 Event Logs Storage
On Board Alpha Numeric Keypad With 4 line 64
character LCD display
System with Tamper Provision
Arm/Disarm through KeyPad /Key fob/SMS
All Zones are User Programmable
Time and Zone Status display on LCD
Provision to check Balance of prepaid through SMS 
SIM installed in the builtin on board GSM Auto Dialer through SMS
Can Connect up to 4 Sirens, Useful for local disconnect alert of the 1st Siren
User Programmable Siren Timing up to a maximum of 20 minutes
Built in Battery Backup Provision (Battery to be installed Mandatorily)
Low Battery cut off,over charge cut off,Deep Discharge protection
Low Battery SMS Alert 
Battary voltage live indication

EGUARD INTRUDER ALARM EG 802G - Specifications

1. Power Supply : 180 to 275volts,1 Phase 50 Hz AC mains 
2. Backup Power : 12VDC ,7Ah - SMFR Lead Acid Battery
3. Operating Current : 600 mA (Typ.) under Normal Conditions
4. Back Up Time : 9 Hrs. ( under fully charged Conditions )
5. Battery Charging Time : 14 Hrs.
6. No of sensor zones : 5 to 8
7. No of appliance control : 1 (Onboard) 
8. Appliance rating : 500 watts per Port
9. Display : 16 X 4 dot matrix LCD display for menu : LCD Indication for 10 Zones Z1 to alarm / Open/Close/GSM Network signal indication / 
10. Menu Keypad : 16 Alpha Numeric Keys for user setup • Zone Programming • Password creation • Voice recording • Text massage editing • Telephone number input • Date and time • Multifunction menu • Confirm entry • Cancel / Esc key • Number keys 0 to 9 • ACT Key (Recognized only with default Time/display screen) • Up, down, (alternate functions on number keys)
11. No of Hooter output : 2 on board optional expand up to 4
12. Alarm : External hooter

Download PDF

EGUARD INTRUDER ALARM EG 402G

EGUARD INTRUDER ALARM EG 402G-4 ZONE GSM

Alarm Panel with 4 Wired Zones 
GSM Alarm Panel with 4 Wired Zones,
1 Panic & 1 Fire Zone
Advanced Micro Controller Based System
Fixed Exit Delay of 45 sec for all 4 zones
0-240 Sec Entry Delay Time Setting
5 Admin Passwords
Arm/Disarm/Alarm/Fault/Panic/Tamper alert to 10 numbers by way of Call/SMS
Memory Provision to store Up to 10 Phone/mobile Numbers
Provision to customize Voice (Up to 8/4-20sec)&SMS for Every Zone as per User Convenience
Provision to Preview Prerecorded Messages
48 Event Logs Storage
On Board Alpha Numeric Keypad With 4 line 64
character LCD display
2 Zones of 24 Hrs ,1 for Fire & 1 for Panic
System with Tamper Provision
Arm/Disarm through KeyPad /Key fob/SMS
All Zones are User Programmable
Time and Zone Status display on LCD
Provision to check Balance of prepaid through SMS 
SIM installed in the builtin on board GSM Auto Dialer through SMS
Can Connect up to 4 Sirens, Useful for local disconnect alert of the 1st Siren
User Programmable Siren Timing up to a maximum of 20 minutes
Built in Battery Backup Provision (Battery to be installed Mandatorily)
Low Battery cut off,over charge cut off,Deep Discharge protection
Low Battery SMS Alert 

EGUARD INTRUDER ALARM EG 402G - Specifications

1. Power Supply : 180 to 275volts,1 Phase 50 Hz AC mains 
2. Backup Power : 12VDC ,7Ah - SMFR Lead Acid Battery
3. Operating Current : 600 mA (Typ.) under Normal Conditions
4. Back Up Time : 9 Hrs. ( under fully charged Conditions )
5. Battery Charging Time : 14 Hrs.
6. No of sensor zones : 5 to 8
7. No of appliance control : 1 (Onboard) 
8. Appliance rating : 500 watts per Port
9. Display : 16 X 4 dot matrix LCD display for menu : LCD Indication for 6 Zones Z1 to Z6 for alarm / Open/Close/GSM Network signal indication / 
10. Menu Keypad : 16 Alpha Numeric Keys for user setup • Zone Programming • Password creation • Voice recording • Text massage editing • Telephone number input • Date and time • Multifunction menu • Confirm entry • Cancel / Esc key • Number keys 0 to 9 • ACT Key (Recognized only with default Time/display screen) • Up, down, (alternate functions on number keys)
11. No of Hooter output : 2 on board optional expand up to 4
12. Alarm : External hooterhttp://eforce.in/EG402G.html

EGUARD INTRUDER ALARM EG 402

EGUARD INTRUDER ALARM EG 402-4 ZONE

Alarm Panel with 4 Wired Zones,
1 Panic & 1 Fire Zone
Advanced Micro Controller Based System
Fixed Exit Delay of 45 sec for all 4 zones
0-240 Sec Entry Delay Time Setting
5 Admin Passwords
On Board Alpha Numeric Keypad With 4 line 64
character LCD display
2 Zones of 24 Hrs ,1 for Fire & 1 for Panic
System with Tamper Provision
Arm/Disarm through KeyPad /Key fob
All Zones are User Programmable
Time and Zone Status display on LCD
Can Connect up to 4 Sirens, Useful for local disconnect alert of the 1st Siren
User Programmable Siren Timing up to a maximum of 20 minutes
Built in Battery Backup Provision (Battery to be installed Mandatorily)
Low Battery cut off,over charge cut off,Deep Discharge protection
Battary voltage live indication

EGUARD INTRUDER ALARM EG 402 - Specifications

1. Power Supply : 180 to 275volts,1 Phase 50 Hz AC mains 
2. Backup Power : 12VDC ,7Ah - SMFR Lead Acid Battery
3. Operating Current : 600 mA (Typ.) under Normal Conditions
4. Back Up Time : 9 Hrs. ( under fully charged Conditions )
5. Battery Charging Time : 14 Hrs.
6. No of sensor zones : 5 to 8
7. No of appliance control : 1 (Onboard) 
8. Appliance rating : 500 watts per Port
9. Display : 16 X 4 dot matrix LCD display for menu : LCD Indication for 04 Zones Z1 to Z4 for alarm / Open/Close http://eforce.in/EG402.html
10. Menu Keypad : 16 Alpha Numeric Keys for user setup • Zone Programming • Password creation • Voice recording • Text massage editing • Telephone number input • Date and time • Multifunction menu • Confirm entry • Cancel / Esc key • Number keys 0 to 9 • M Key (Recognized only with default Time/display screen) • Up, down, (alternate functions on number keys)
11. No of Hooter output : 2 on board optional expand up to 4
12. Alarm : External hooter

EGUARD INTRUDER ALARM EG201K

http://eforce.in/EG201K.html

EGUARD INTRUDER ALARM EG 201K

Day/Night Mode Arming One Delay Zone, One Instant Zone Instant Siren Alert For Zone Open 30/60 Sec Delay Time Setting LED Indicators For Individual Zone Status In built Sirens With Tamper Provision Programmable Siren Out Timing For Short & Long duration Battery Backup Provision Low Battery,over charge cutoff Resettable Fuse Control Panel Door Tamper Alert Micro-Controller Based System

Download PDF

EForce Security Electronics

The Rapidly growing Intrusion Alarm Market having become very competitive demands quality products, quality & timely delivery of Spares & Service. Most importantly Products, Spares & Services should be available at Affordable Pricing for the entire market.

With increased incidents of Theft & Robbery, be it by insiders, outsiders, petty thieves or professional criminals, it is no longer wise to consider them as casual. Any responsible establishment will have to put in place effective and emergent systems to deal with such cases of Burglary or Theft so that avoidable monetary loss and perhaps loss of life can be prevented.

E force Security Electronics

Is one of the first indigenous manufacturer of Wired Wireless and Hybrid Intrusion Alarm Systems in India. The products from E force are branded as E Guard. E Guard products are 100% designed and developed to suit Indian environment.

Being a 4 year old company, e force has acquired the state of the art technology products developed, manufactured by the erstwhile M/s Comfort Solutions Pvt Ltd since 2003 during the year 2010. The company has installed various types of innovative & regular products to a varied section of clients

E Guard being a proven, rugged and innovative product, the company wants to Make available the same to the retail market.

India being a large and growing market we are looking for professional channel partners across the country to meet our goal. By Channel Partners we mean Distributors, Dealers and System Integrators.